Skip to main content

3B Medical From: O2C2030 To: O2U2012 - O2 Replacement Parts and Accessories

In stock
3B Medical:
O2C2030 - O2U2012
FSA Eligible
To see all the content Slide to the right or left
Grouped product items
Sold By
Price Qty
O2C2030Bag of 50
O2S2007Case of 50
O2S2012Case of 50
O2U2007Case of 50
O2U2012Case of 50
Skip to main content
Note: Please purchase based on product "Code". Images are provided by manufacturers and might not represent the product accurately.
Skip to main content

Visa • MasterCard • Discover • American Express • JCB • Diners Club

visa MasterCard Discover American JCB Diners

Buy today, build your future

Pay over time

Your entire online order, split into 4 interest-free payments scheduled over a 6 week period.

No interest, ever

We charge the retail partner, not you. As long as you pay on time, there will be no additional fees.

No credit impact

Our instant approval decisioning process has zero impact to your credit score.

Buy now, Pay later Anywhere.

With QuadPay, you can shop at your favorite stores and pay over four installments.

Pay over time

Split any purchase into 4 installments over 6 weeks.

Pay anywhere

Shop with Quadpay via our retail partners or anywhere Visa is accepted.

No credit impact

Our instant approval decisioning process has zero impact on your credit score.

Ultra Soft 7' Oxygen Cannula- 50 per Case
More Information
Manufacturer 3B Medical
Brand Others
Categories Others, Acute Respiratory Distress Syndrome - ARDS, Adapter And Connector, Airway Obstruction, Asthma, Chronic Obstructive Pulmonary Disease - COPD, Condition, Infant Respiratory Distress Syndrome - IRDS, Lung Cancer, Lung Infection, Nasal Cannula, Oxygen Concentrator Parts, Oxygen Parts, Oxygen Therapy, Oxygen Tube, Pneumonia, Pneumothorax, Pulmonary Edema, Pulmonary Fibrosis, Respiratory Infection, Respiratory Therapy Parts, Tuberculosis, Airway Intubation, Lung Infections, Urinary Catheter, Breathing Tube
Code O2C2030 - O2U2012
Require Prescription? No
Store Discount Catheters|Respiratory Care|Stomabags
Score: 4.7 from 1 - 5
41 Review
Henry Review from
April 21, 2021
When changing this first check using....
Though some do not realize that most vehicles today have (4) O2 sensors Upstream Bank 1 & 2 and downstream (after converter) sensor 1 & 2. Trace the correct wire as there are two separate plugs in a tight area. Use a standard multimeter set to 20K Ohms th
Review from
December 8, 2021
This is my third one... Fingers crossed. Return was seamless, so no worries there. I've cleaned the throttle body out and will be replacing the intake resonator. Be careful with engine cleaners, make sure they are safe for O2 sensors before using. The Sat
lhpaul Review from
August 29, 2021
stopped the 'dinging' from my check engine light
I had just purchased my vehicle and the diagnostic tool that Auto Zone let me use said that my sensor was bad. I replaced it and the 'dinging' that was coming from the bad sensor and check engine light had stopped. My check engine light, however, did not
Jorge Review from
November 11, 2021
Excellent reliable product
This product, usually has a life span of 10 years on brand new cars. It is easy to reinstall. First, disconnect the ground cable to the battery. Jack up the car, use safety 3000 pounds jacks to support the car as close to where the sensor is located with
Grant Review from
September 30, 2021
O2 sensors do control fuel consumption.
Bosch is a great reliable product and have used this brand over the years. O2 sensors do need to be changed and according to recommended mileage schedules. O2 does regulated and control of how much fuel/air mix is used. If it goes out, excessive enriched
gugs Review from
November 14, 2021
It fixed my check Engine issue
I bought the replacement O2 sencer, after getting it scanned, instalation was easy. Removing the old O2 censer was easy enough, when reinstalling the new one, be carful not to cross thread the new one. I compared the old censer to the new one and yhe two
Juan Review from
July 2, 2021
No more check engine light
This was a simple install even tho I didnt have the sensor tool to loosen the sensor. All I used was an adjustable wrench and got the job done!!!!!I dont know if replacing this O2 sensor made my truck run better but it really does with this Bosch sensor.
CORY Review from
Summit Racing Equipment
January 12, 2021
Factory fit
Summit ended up being my last resort to find this sensor, it should have been my first choice. I ordered the O2 sensor for my V10TDI touareg 3 times from various places. But they where all the updated plug and the parts guys kept insisting it would fit. S
Allen Review from
Advance Auto Parts
November 25, 2020
Would buy again! Love Advance Auto!!
This was purchased for my 2004 Ford Explorer. Had a O2 sensor code. I think this was a " downstream sensor".. Remember , if you have two sensors , one before and one after the catalytic converter, they have different computer settings. Make sure you read
DAVE Review from
Summit Racing Equipment
September 23, 2020
Bosch O2 sensor
I replaced my AEM sensor after getting what appeared to be unreliable readings. Installed a new sensor and it seems I have consistent readings again. This sensor does not last long. Use it for tuning then remove and cap it with provided cap fitting. May g
Scott Review from
August 29, 2021
This really is exact OEM fit.
Replaced my right bank number 1 sensor on 2004 F150. Within some miles and several ignition starts the code cleared. Very satisfied with sensor purchase. Not satisfied with Ford requiring removal of front right tire, fender liner, and transmission dipstic
Guy Review from
Advance Auto Parts
July 22, 2021
Just what I needed
Seems to have worked well.. Good price and functional. The little spice kit that comes with it I forget the trade name enables you to use this sensor on any application or automobile. Keep in mind that you will use the plug from your existing sensor. Just
Jim Review from
June 29, 2020
Doesn't fix the problem
Ho2s code stuck rich, was diag. by a dealer bad oxygen sensor B1S2. Replaced the sensor fine for 6 wks. then set code again, sensor under warranty and replaced again. This time went about a month set a heater code again replaced sensor. Has been 2 months
Joe Review from
November 4, 2021
Exact fit my 2006 Jeep Liberty
This was an exact fit for my 2006 Jeep Liberty. I was showing a check engine code for a malfunctioning 02 sensor. I replaced it once with a off-brand after market part and it still triggered a check engine warning light. Replaced it with the Bosch 02 sens
Dave Review from
August 26, 2021
Worked perfectly. OEM for BMW
Good price, works fine. Cured my BMW 330XI's "lean" condition faults, even though I never had any O2 sensor codes. Got tired of chasing phantom vacuum leaks and other stuff that the codes claimes were wrong. Swapped the pre-cat O2 sensors, and all is well
John Review from
July 10, 2020
Buy this one. Avoid cheap versions
I made the mistake of trying a pair of cheap O2 sensors from some off-brand and it cost me. The engine, a 2.7L V6 in our 2005 Sebring, ran very rough. So I ran down to Autozone and bought these. Shazam! Instant difference.The engine is silky smooth. My o
Member 1778802 Review from
October 18, 2017
Fit 1996 1.9 Liter Mercury Tracer Perfectly
I use a Davis Instruments Car Chip Pro to continuously monitor and track the engine performance of this 21-year-old car with 186,000 miles. I obtained a "bank 1, oxygen sensor 2" error. I decided to replace the upstream sensor first. After replacing the s
Jonas Review from
March 3, 2021
2010 F-150 4.6L Passenger side fit perfect
Needed upstream (before cat) Passenger side 02 Sensor to fix Bank1 Sensor1 code on 2010 F150 4.6L V8. The Bosch 17475 fit perfectly, connected perfectly but no rent a tool will fit to get it out. I recommend a 21mm Flare Nut Wrench or just make your own w
Squire Review from
April 8, 2021
Housing Larger
The sensor works great! Packaged well and anti-seize compound pre-applied. However, the wire end of the sensor housing is larger in diameter than an OEM sensor for 06 Mustang V6. Made it difficult to get the sensor tool on because it was so close to trans
Joe Review from
Advance Auto Parts
August 1, 2016
Good Replacement O2 sensor
I purchased this product to correct an issue I had with my 2007 Ford explorer limited v8. I had a recurring error code (P0420) that was indicating that my bank 1 catalytic converter was running outside of its parameters. I swapped the 2 existing downstrea
Michael Review from
Advance Auto Parts
December 27, 2020
Good sensor in a pinch.
The sensor itself is well made. Comes with its own connectors and requires you to cut the oem connector off. Meaning that your stuck using these sensors from there out. I just it the oem style connector off of the sensor I removed and spliced it onto the
Matty Review from
January 11, 2020
Wires too short
Wires on the new unit were too short. I had to to pull the plug off of mounting bracket and rerun the the plug straight to where the the new sensor was being installed. It took 2 needle nose pliers to match the plugs together because it was still such a t
jae Review from
September 19, 2020
Sturdy sensor
Got this for 2013 MB c350 bank2,#2 Sensor looks good and well made. Grease wasn't in the box but was applied on the thread. (Maybe Open box item???) Check engine light didn't go away right after installation and couldn't clear with Fixed scanner. But got
mike Review from
November 4, 2021
perfect fit
the O2 sensor was exactly what I needed. My 2003 chevy suburban was consuming more fuel than it should and I noticed later that the engine light had come on giving me an O2 sensor out. I had diagnosed the problem to the bank 1 sensor1 and ordered the sens
Art Review from
April 25, 2021
No rubber grommet for clip
My 1998 honda civic has a clip to keep the wire from hanging. My old sensor wire had a rubber grommet wrapped around the wire so that it could be inserted into the clip. I cut the grommet off the old one and wrapped it around the new wire and then inserte
DANIEL Review from
Summit Racing Equipment
September 5, 2018
Great for innovate wideband
SOooooo many knock off o2 sensors on the market claiming to be bosch . I came to summit so I knew i would be buying an actual Bosch o2 sensor. Plus if any issues i could return it.. I bought these to use as replacements for my innovate DLG-1 dual wideband
Richard Review from
Advance Auto Parts
October 29, 2016
Easy fix for 2000 explorer
After reading the reviews on how hard it is to change on other cars I was worried I might not be able to do this. My explorer was easy,there are 2,before the converter and after.Just follow the tailpipe. Crescent wrench when still warm and off it came dis
Bill A Review from
August 10, 2020
O2 sensor compatibility
Ordered up and downstream sensors would give downstream a 5 but upstream a 3 so i met in the middle. Downstream is working well, however upstream gave me a P1133 not switching enough or too slow for this perticular Car, 2006 Pontiac solstice. Had to go to
Timothy Review from
April 3, 2021
It works
I was a little skeptical about doing it myself, but my check engine light was on and my inspection was overdue. Removing the old one was a challenge, but then I just decided to cut it and use an impact on it, and out it was . The rest was breeze. It's doi
Miguel Review from
March 8, 2020
Easy install
Reasonably priced, exact fit, fairly easy to install. Once replaced, quickly cleared my check engine light fault. I hope this one lasts as long as my original. Has been installed for over 3 months now with no issues. One small thing you will have to do is
Chadwick Review from
May 31, 2020
Counter clockwise to take off ur old oxygen sensor
I purchased Bank 1 & 2 sensors & both were faster to change than a battery. Bank 2 is easiest to change from top of motor. Loosen both 1 & 2 counter clockwise. I also rented the oxygen sensor tool kit. Which made taking Bank 2 off that much easier. My 200
L. Review from
May 9, 2020
I told my mechanic what I needed.
I love this product. My mechanic tried to tell me what was wrong. And he was wrong. I took my car first to be tested at one of those auto stores. They came out to my car and tested it and said it was my knock sensor. My mechanic said they don't know what'
JOHN Review from
Advance Auto Parts
October 18, 2020
"Having Good Luck With Bosch So Far"
Working out good so far. I had better luck with the special 22mm socket than a 7/8 wrench getting it out. I soaked it with PB Blaster before hand to help loosen it. I hope this Bosch lasts as long as the AC Delco that came out. This is the 3rd Bosch senso
Steven Review from
Advance Auto Parts
July 8, 2019
Replaced downstream OEM Subaru, cut and splice. Works
This O2 sensor works well. But, it is not a drop in replacement. You need to cut and splice the wires. You will probably reuse the old connector. I splice and solder the joint, and used a shrinky dink insulation for each wire. It was not too, hard. Removi
Mashoe Review from
March 31, 2020
Exact fit but looks different than OEM.
Exact fit to OEM cat. converter. Uses same 22mm socket and plugs directly into OEM wiring harness. Sensor operates without issue sending voltage values, no Check Engine Light after install. Has a different physical appearance compared to OEM sensor but wo
mclarksays Review from
Advance Auto Parts
December 18, 2017
9-2x or Impreza 2.5 Down Strm O2 Sensor
Worked as down stream on a 2005 Saab 9-2x Linear, which is a Subaru dressed up. Replaced at the time of catalytic converter, which is the Identifix recommend path of correcting p0420 for either the 9-2x or Impreza. Live data shows working as should be. Ob
Richard Sobe Review from
July 10, 2021
Took care of the P0131 CEL code
On June 24th I had a P0131 code show up, and determined it was the upper O2 sensor. So I bought this one and cleared the code, and its still working with no CEL light coming on anymore. It is now July 10th, so I think that's been plenty of time to be sure
Brian Review from
May 30, 2021
Perfect fit for a 2005 3.0L ford Ranger
Product fit like a glove, wire correct length and the grease that was pre applied to the threads help it screw most of the way in by hand. Only ad to turn it with a wrench a couple of times to tighten. A caution on the job, the old ones are a bear to get
Bryan Review from
Advance Auto Parts
June 26, 2020
Not Plug-n-Play, assembly required
Functions as it should, but was not expecting to have to cut my oem plug off and re-use to make this part work. Expected plug-n-play. Took some dedicated time to decipher the chart and match up wiring properly. Connector wasnt hard to assemble, a little c
William Review from
October 28, 2020
Bogging down and rough idle
We had the associates test the vehicle to find out what was wrong. They pinpointed the problem as an oxygen sensor. They were even able to tell us the location of which sensor needed to be changed. It was in a tight spot. However after changing it the tru
Logan74 Review from
March 28, 2019
Perfect fit. Easy install.
Be sure to change this part out with the engine cold. I used a standard adjustable wrench and it took one good tug to loosen it up. The new sensor simply screws back in and the wiring harness plugs right in like it should. I installed this part on a 2001
© All Rights Reserved. is part of SB Medical, a 2nd Phoenix, Inc. subsidiary.